PROCEDURE
INSTALL REAR SEATBACK ASSEMBLY RH
Place the rear seatback assembly RH in the cabin.
Note
Be careful not to damage the vehicle body.
Install the rear seatback assembly RH with the 2 bolts.
Engage the fastener to connect the rear No. 1 floor board sub-assembly.
INSTALL REAR SEATBACK ASSEMBLY LH
Place the rear seatback assembly LH in the cabin.
Note
Be careful not to damage the vehicle body.
Install the rear seatback assembly LH with the 2 bolts.
Engage the fastener to connect the rear No. 2 floor board sub-assembly.
INSTALL REAR SEAT CUSHION LOCK HOOK
Engage the claw to install a new rear seat cushion lock hook.
Note
Rear seat cushion lock hooks must not be reused.
Tech Tips
Use the same procedure the LH side and RH side.
INSTALL REAR SEAT CUSHION ASSEMBLY
Place the rear seat cushion assembly in the cabin.
Note
Be careful not to damage the vehicle body.
Pass the rear center seat outer belt assembly through the rear seat cushion assembly.
Install the rear center seat outer belt assembly with the bolt.
Engage the guide as shown in the illustration.
Pass the rear seat inner with center belt assembly LH and rear seat inner belt assembly through the rear seat cushion assembly as shown in the illustration.
*1 | Rear Seat Inner Belt Assembly | *2 | Rear Seat Inner with Center Belt Assembly LH |
Engage the 2 hooks of the seat cushion to the vehicle body as shown in the illustration.
Confirm that the seat cushion is firmly installed.
Note
When installing the seat cushion, make sure that the seat belt buckles are not under the seat cushion.
INSTALL REAR SEAT HEADREST ASSEMBLY
INSTALL REAR SEAT CENTER HEADREST ASSEMBLY