REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    1. B001KJM

      Engage the grommet.

    2. Connect the connector.

    3. Engage the clamp to install the rear combination light socket and wire sub-assembly.

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY

    Click here

  3. INSTALL NO. 2 ROOM LIGHT ASSEMBLY (for RH Side)

    Click here

  4. INSTALL TONNEAU COVER HOLDER CAP

    Click here

  5. INSTALL TONNEAU COVER HOOK

    Click here

  6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  7. INSTALL ROPE HOOK ASSEMBLY

    Click here

  8. INSTALL REAR SEAT SIDE GARNISH

    Click here

  9. INSTALL REAR SEAT SIDE COVER RH (for RH Side)

    Click here

  10. INSTALL REAR DECK TRIM COVER

    Click here

  11. INSTALL DECK TRIM SERVICE HOLE COVER

    Click here

  12. INSTALL REAR NO. 1 FLOOR BOARD

    Click here

  13. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

    Click here

  14. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

    Click here

  15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  16. INSTALL DECK FLOOR BOX LH (w/o Woofer)

    Click here

  17. INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer)

    Click here

  18. INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer)

    Click here

  19. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE (for RH Side)

    Click here

  20. INSTALL DECK FLOOR BOX RH

    Click here

  21. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

  22. INSTALL REAR DECK FLOOR BOX

    Click here

  23. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

  24. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)

    Click here

  25. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)

    Click here

  26. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  27. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  28. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

    for LH Side: Click here

    for RH Side: Click here

  29. INSTALL REAR DOOR SCUFF PLATE

    Click here

  30. INSTALL REAR UPPER BUMPER RETAINER


    1. Install the rear upper bumper retainer with the screw.

      Torque:
      2.2 N*m  { 22 kgf*cm, 20 in.*lbf }

  31. INSTALL REAR BUMPER ASSEMBLY

    Click here

  32. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.

  33. INSTALL REAR COMBINATION LIGHT LENS AND BODY


    1. Connect the connector.

    2. Engage the clamp.

    3. A004W1O

      Turn the rear turn signal light bulb and rear combination light socket and wire sub-assembly in the direction indicated by the arrow shown in the illustration to install them as a unit.

    4. Engage the 3 guides and pin.

    5. Install the rear combination light lens and body with the 2 screws.

      Torque:
      2.2 N*m  { 22 kgf*cm, 20 in.*lbf }

  34. INSTALL REAR LIGHT COVER


    1. A004ZM5

      Engage the 6 claws to install the 2 rear light covers.