FUEL LID OPENER MOTOR ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FUEL LID WITH MOTOR LOCK ASSEMBLY

   
   

   1. Install the fuel lid with motor lock assembly with the bolt.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Engage the 2 claws.

   3. Connect the connector.

2. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX (w/ Woofer)

   Click here

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

4. INSTALL TONNEAU COVER HOLDER CAP

   Click here

5. INSTALL TONNEAU COVER HOOK

   Click here

6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

   Click here

7. INSTALL ROPE HOOK ASSEMBLY

   Click here

8. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

9. INSTALL REAR SEATBACK ASSEMBLY LH

   Click here

10. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

11. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

13. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

14. INSTALL REAR DECK TRIM COVER

    Click here

15. INSTALL DECK TRIM SERVICE HOLE COVER

    Click here

16. INSTALL REAR NO. 1 FLOOR BOARD

    Click here

17. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

    Click here

18. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

    Click here

19. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

20. INSTALL DECK FLOOR BOX LH (w/o Woofer)

    Click here

21. INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer)

    Click here

22. INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer)

    Click here

23. INSTALL DECK FLOOR BOX RH

    Click here

24. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

25. INSTALL REAR DECK FLOOR BOX

    Click here

26. INSTALL REAR NO. 2 FLOOR BOARD

    Click here