AIR CONDITIONING PRESSURE SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM (for HFC-134a(R134a))

    Click here

  3. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM (for HFO-1234yf(R1234yf))

    Click here

  4. REMOVE REAR NO. 2 FLOOR BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE REAR NO. 3 FLOOR BOARD

    Click here

  7. REMOVE DECK FLOOR BOX RH

    Click here

  8. REMOVE REAR FLOOR BOARD UPPER NO. 3 PLATE

    Click here

  9. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. REMOVE AIR CONDITIONING PRESSURE SENSOR


    1. Disconnect the connector.

    2. B001LYH

      Remove the air conditioning pressure sensor.

      Note

      Do not deform the piping.