REAR SEAT OUTER BELT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL REAR SEAT OUTER BELT ASSEMBLY


    1. Temporarily install the rear seat outer belt assembly.

    2. Install the bolt <C>.

      Torque:
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }

    3. Install the rear seat outer belt assembly with the bolt <B>.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    4. Install the shoulder anchor of the rear seat outer belt assembly with the bolt <A>.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    5. w/ Pretensioner:


      1. B001MU9E01
        Text in Illustration
        *1 Pretensioner Connector

        Connect the pretensioner connector and lock the locking button as shown in the illustration.

        Note

        Securely lock the locking button.

  2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY

    Click here

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY

    Click here

  4. CONNECT REAR SEAT OUTER BELT ASSEMBLY


    1. B001KQTE01
      Text in Illustration
      *1 Protruding Part

      Connect the floor end of the rear seat outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat outer belt assembly to overlap the protruding parts of the floor panel.

  5. INSTALL NO. 2 ROOM LIGHT ASSEMBLY (for RH Side)

    Click here

  6. INSTALL TONNEAU COVER HOLDER CAP

    Click here

  7. INSTALL TONNEAU COVER HOOK

    Click here

  8. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  9. INSTALL ROPE HOOK ASSEMBLY

    Click here

  10. INSTALL REAR SEAT SIDE GARNISH

    Click here

  11. INSTALL REAR SEAT SIDE COVER RH (for RH Side)

    Click here

  12. INSTALL REAR DECK TRIM COVER

    Click here

  13. INSTALL DECK TRIM SERVICE HOLE COVER

    Click here

  14. INSTALL REAR NO. 1 FLOOR BOARD

    Click here

  15. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

    Click here

  16. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

    Click here

  17. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  18. INSTALL DECK FLOOR BOX LH (w/o Woofer)

    Click here

  19. INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer)

    Click here

  20. INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer)

    Click here

  21. INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)

    Click here

  22. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  23. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  24. INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)

    Click here

  25. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

    for LH Side: Click here

    for RH Side: Click here

  26. INSTALL REAR DOOR SCUFF PLATE

    Click here

  27. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  28. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE (for RH Side)

    Click here

  29. INSTALL DECK FLOOR BOX RH

    Click here

  30. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

  31. INSTALL REAR DECK FLOOR BOX

    Click here

  32. INSTALL REAR NO. 2 FLOOR BOARD

    Click here

  33. INSPECT SRS WARNING LIGHT

    Click here