REAR SEAT INNER BELT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY (w/o Seat Heater System)


    1. A004ZBUE01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Install the rear seat inner belt assembly with the arrow on the anchor part facing the front of the vehicle.

      • Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the floor panel.

  2. INSTALL REAR SEAT INNER BELT ASSEMBLY (w/ Seat Heater System)


    1. A004ZGEE01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Install the rear seat inner belt assembly with the arrow on the anchor part facing the front of the vehicle.

      • Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the floor panel.

    2. Engage the 2 clamps.

    3. Connect the connector.

  3. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (w/o Seat Heater System)


    1. A004VYGE01
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner with center belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Install the rear seat inner belt assembly with the arrow on the anchor part facing the front of the vehicle.

      • Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the floor panel.

  4. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (w/ Seat Heater System)


    1. A004YG9E03
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner with center belt assembly LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note


      • Install the rear seat inner belt assembly with the arrow on the anchor part facing the front of the vehicle.

      • Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of floor panel.

    2. Engage the 2 clamps.

    3. Connect the 2 connectors.

  5. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  6. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here