PERFORMANCE DAMPER INSTALLATION

PROCEDURE


  1. INSTALL SUSPENSION TOWER DAMPER


    1. A004X4LE06
      Text in Illustration
      *1 Label
      *a LH Side
      *b RH Side

      Install the suspension tower damper with the 2 nuts.

      Torque:
      35 N*m  { 357 kgf*cm, 26 ft.*lbf }

      Tech Tips

      Make sure to install the suspension tower damper with the label facing upright.

  2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

    Click here

  3. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

    Click here

  4. INSTALL COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

    Click here

  5. INSTALL COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

    Click here

  6. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

    Click here

  7. INSTALL NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

    Click here

  8. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

    Click here

  9. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

    Click here

  10. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here