BATTERY BLOWER INSTALLATION

PROCEDURE

1. INSTALL BATTERY COOLING BLOWER ASSEMBLY

   Note

   
   

   • Be sure not to touch the fan part of the battery cooling blower assembly.

   • Do not lift the battery cooling blower assembly using the wire harness.

   
   

   1. Install the battery cooling blower assembly with the 2 bolts and nut.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Connect the battery cooling blower assembly connector and clamp.

   3. Connect the 2 wire harness clamps.

2. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

   Click here

3. INSTALL REAR FLOOR BOARD SPACER

   Click here

4. INSTALL REAR SEAT SIDE GARNISH RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

5. INSTALL REAR DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

6. INSTALL REAR SEATBACK ASSEMBLY RH

   Click here

7. INSTALL REAR NO. 1 FLOOR BOARD

   Click here

8. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY

   Click here

9. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY

   Click here

10. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

11. INSTALL DECK FLOOR BOX LH (w/o Woofer)

    Click here

12. INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer)

    Click here

13. INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer)

    Click here

14. INSTALL DECK FLOOR BOX RH

    Click here

15. INSTALL REAR NO. 3 FLOOR BOARD

    Click here

16. INSTALL REAR DECK FLOOR BOX

    Click here

17. INSTALL REAR NO. 2 FLOOR BOARD

    Click here