AIR FUEL RATIO SENSOR REMOVAL

PROCEDURE

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

2. REMOVE NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

   Click here

3. REMOVE NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

   Click here

4. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for LHD)

   Click here

5. REMOVE NO. 2 HEATER AIR DUCT SPLASH SHIELD SEAL (for RHD)

   Click here

6. REMOVE COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

   Click here

7. REMOVE COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

   Click here

8. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

   Click here

9. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

   Click here

10. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

11. REMOVE AIR FUEL RATIO SENSOR NO.2

    
    

    1. 

       Disconnect the air fuel ratio sensor connector and clamp.

    2. 

       Using SST, remove the air fuel ratio sensor.

       SST

       09224-00010