REAR BUMPER REMOVAL

PROCEDURE


  1. REMOVE UPPER REAR BUMPER COVER LH

    A001ERAE02
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 3 claws and remove the upper rear bumper cover LH.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE UPPER REAR BUMPER COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. REMOVE CENTER REAR BUMPER PLATE (w/ Dynamic Radar Cruise Control System)

    A001AG5

    1. Detach the 4 claws and remove the rear bumper center plate.

  4. REMOVE REAR BUMPER COVER


    1. A001DFL

      Remove the screw, and then remove the rear bumper seal bracket.

      Tech Tips

      Use the same procedure for both screws and rear bumper seal brackets.

    2. Remove the 2 screws.

    3. Put protective tape around the rear bumper cover.

    4. Using a clip remover, remove the 6 clips.

    5. Remove the 2 screws.

    6. Detach the 14 claws and 4 guides.

    7. Disconnect the No. 3 floor wire connector.

    8. Remove the rear bumper cover.

      A001D2UE02
      Text in Illustration
      *1 Protective Tape - -

  5. REMOVE REAR BUMPER ENERGY ABSORBER

    A001AY9

    1. Remove the rear bumper energy absorber.

  6. REMOVE REAR BUMPER NO. 1 REINFORCEMENT

    A0019PN

    1. Remove the 8 bolts and rear bumper No. 1 reinforcement.

  7. REMOVE LUGGAGE TRIM SERVICE HOLE COVER

    Click here

  8. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  9. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE REAR BUMPER UPPER RETAINER LH

    A001CDI

    1. Using a clip remover, detach the 2 clips and remove the rear bumper upper retainer.

  11. REMOVE REAR BUMPER UPPER RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE BLIND SPOT MONITOR SENSOR

    Click here

  13. REMOVE REAR BUMPER LOWER SIDE RETAINER LH

    A001DOZE03

    1. Using a screwdriver, turn the clip 90° and remove the clip.

    2. Using a clip remover, detach the claw and remove the rear bumper lower side retainer LH.

  14. REMOVE REAR BUMPER LOWER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. REMOVE REAR BUMPER SIDE SUPPORT LH

    A001C1JE03

    1. Using a screwdriver, turn the 5 clips 90° and remove the 5 clips.

    2. Using a clip remover, detach the clip and claw and remove the rear bumper side support.

  16. REMOVE REAR BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  17. REMOVE REAR TIRE PRESSURE MONITOR INITIATOR

    Click here

  18. REMOVE REAR BUMPER LOWER RETAINER LH

    A001DR9E03
    Text in Illustration
    *1 Grommet

    1. Remove the 4 screws and grommet.

    2. Using a clip remover, detach the 4 claws and remove the rear bumper lower retainer LH.

  19. REMOVE REAR BUMPER LOWER RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.