BLIND SPOT MONITOR SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note


  • Avoid any impact to the blind spot monitor sensor.

  • Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.

PROCEDURE


  1. REMOVE REAR BUMPER COVER

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH


    1. A001CXY

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor LH.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH


    1. A001ECG

      Disconnect the connector.

    2. Remove the 3 nuts and blind spot monitor sensor RH.