LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  5. REMOVE INSTRUMENT SIDE PANEL RH

    Click here

  6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  7. REMOVE INSTRUMENT PANEL LOWER

    Click here

  8. REMOVE NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY LOWER

    Click here

  9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  10. REMOVE LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY


    1. A001AIX

      Detach the 2 claws and remove the luggage door opening cancel switch assembly.