LUGGAGE COMPARTMENT DOOR OPENER OUTER SWITCH REMOVAL

PROCEDURE


  1. REPLACE PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  5. REMOVE DOOR INSIDE HANDLE BEZEL

    Click here

  6. REMOVE SWITCH BEZEL

    Click here

  7. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY

    Click here

  8. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH

    Click here

  9. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

  11. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE BACK DOOR TRIM COVER

    Click here

  13. REMOVE REAR LIGHT ASSEMBLY LH

    Click here

  14. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Click here

  16. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  17. REMOVE LUGGAGE ELECTRICAL KEY SWITCH


    1. A001DC8

      Disconnect the sub-wire harness connector.

    2. A001BSV

      Disconnect the connector.

    3. A001D48

      Remove the 2 screws and television camera assembly from the luggage electrical key switch.