LUGGAGE COMPARTMENT DOOR CLOSER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY

   
   

   1. Connect the cable.

   2. Install the luggage door closer assembly with the 3 bolts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   3. Connect the connector.

2. INSTALL BACK DOOR TRIM COVER

   Click here

3. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

   Click here

4. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

   Tech Tips

   Use the same procedure described for the LH side.

5. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH

   Click here

6. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH

   Tech Tips

   Use the same procedure described for the LH side.

7. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY

   Click here

8. INSTALL SWITCH BEZEL

   Click here

9. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP

   Click here

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

11. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here