LUGGAGE COMPARTMENT DOOR CLOSER ASSEMBLY REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP

    Click here

  5. INSTALL SWITCH BEZEL

    Click here

  6. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY

    Click here

  7. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH

    Click here

  8. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH

    Click here

  10. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL BACK DOOR TRIM COVER

    Click here

  12. REMOVE LUGGAGE DOOR CLOSER ASSEMBLY


    1. A001C2N

      Disconnect the connector.

    2. Remove the 3 bolts and luggage door closer assembly.

    3. Disconnect the cable.