LUGGAGE COMPARTMENT DOOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Click here

  2. INSTALL LICENSE PLATE LIGHT ASSEMBLY

    Click here

  3. INSTALL LUGGAGE ELECTRICAL KEY SWITCH

    Click here

  4. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  5. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Click here

  6. INSTALL REAR LIGHT ASSEMBLY RH

    Click here

  7. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  8. INSTALL LUGGAGE COMPARTMENT DOOR CLOSER SWITCH

    Click here

  9. INSTALL LUGGAGE DOOR CLOSER ASSEMBLY

    Click here

  10. INSTALL LUGGAGE COMPARTMENT LOCK CYLINDER


    1. Connect the cable.

    2. Install the luggage compartment lock cylinder with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Install the clamp and connect the connector.

  11. INSTALL BACK DOOR TRIM COVER


    1. Attache the 10 clips to install the back door trim cover.

    2. Install the 4 clips.

  12. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. Install the luggage compartment door hinge cover LH with the 3 clips.

  13. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH


    1. Attach the 3 claws to install the rear combination light service cover LH.

  15. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  16. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. Attach the 2 claws to install the No. 2 courtesy light assembly.

  17. INSTALL SWITCH BEZEL


    1. Attach the 2 claws to install the switch bezel.

  18. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. Install the luggage compartment door assist grip with the 2 screws.

    2. A001CRW

      Attach the 3 claws.

  19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  20. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here

  21. ADJUST REAR TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)

    Click here