LUGGAGE COMPARTMENT DOOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. A0019AWE03
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 3 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A001D8S

      Remove the 2 screws and luggage compartment door assist grip.

  5. REMOVE SWITCH BEZEL


    1. A001CFL

      Using a screwdriver, detach the 2 claws and remove the switch bezel.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE NO. 2 COURTESY LIGHT ASSEMBLY


    1. A001D5KE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the No. 2 courtesy light assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH


    1. A001AX4

      Detach the 2 claws and remove the rear combination light service cover LH.

  8. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. A001AAD

      Using a clip remover, remove the 3 clips and luggage compartment door hinge cover LH.

  10. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE BACK DOOR TRIM COVER


    1. A00194T

      Using a clip remover, remove the 4 clips.

    2. Detach the 10 clips and back door trim cover.

  12. REMOVE LUGGAGE COMPARTMENT LOCK CYLINDER


    1. A001AUJ

      Disconnect the connector and remove the connector clamp.

    2. Remove the 2 nuts and luggage compartment lock cylinder.

    3. Disconnect the cable.

  13. REMOVE LUGGAGE DOOR CLOSER ASSEMBLY

    Click here

  14. REMOVE LUGGAGE COMPARTMENT DOOR CLOSER SWITCH

    Click here

  15. REMOVE REAR LIGHT ASSEMBLY LH

    Click here

  16. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  17. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Click here

  18. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  19. REMOVE LUGGAGE ELECTRICAL KEY SWITCH

    Click here

  20. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    Click here

  21. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Click here