FRONT SEAT CUSHION HEATER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. Set the separate type front seat cushion cover in place.

    2. for Driver Side:


      1. A001DT0E01
        Text in Illustration
        *1 Hog Ring Pliers

        except Sport Package:

        Using hog ring pliers, install the separate type front seat cushion cover to the front seat cushion pad with 21 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      2. A001DNRE01
        Text in Illustration
        *1 Hog Ring Pliers

        for Sport Package:

        Using hog ring pliers, install the separate type front seat cushion cover to the front seat cushion pad with 17 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      3. A001AMT

        Install the 2 clips.

    3. for Front Passenger Side:

      for Ottoman:


      1. A001A2VE01
        Text in Illustration
        *1 Hog Ring Pliers

        Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with 21 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      2. A001D9C

        Install the 2 clips.

    4. for Front Passenger Side:

      except Ottoman:


      1. A001DZ7E01
        Text in Illustration
        *1 Hog Ring Pliers

        except Sport Package:

        Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with 21 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      2. A001C5XE01
        Text in Illustration
        *1 Hog Ring Pliers

        for Sport Package:

        Using hog ring pliers, install the separate type front seat cushion cover to the seat cushion pad with 17 new hog rings.

        Note


        • Be careful not to damage the separate type front seat cushion cover.

        • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

      3. A001D9C

        Install the 2 clips.

  2. INSTALL SEAT CUSHION COVER WITH PAD

    Click here

  3. INSTALL FRONT SEAT CUSHION ASSEMBLY LH

    Click here

  4. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  5. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  7. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH (for Driver Side)

    Click here

  8. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Front Passenger Side)

    Click here

  9. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  10. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.