CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
PROCEDURE
PRECAUTION
Note
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
REMOVE COWL TOP VENTILATOR LOUVER RH
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE REAR SEAT CUSHION ASSEMBLY LH
REMOVE REAR SEAT CUSHION ASSEMBLY RH
REMOVE REAR SEATBACK ASSEMBLY LH
REMOVE REAR SEATBACK ASSEMBLY RH
REMOVE REAR SEAT SHOULDER BELT GUIDE LH
REMOVE REAR SEAT HEADREST ASSEMBLY
REMOVE REAR SEAT HEADREST SUPPORT
REMOVE REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY
REMOVE POSITION CONTROL ECU ASSEMBLY
REMOVE REAR SEAT CLIMATE CONTROL ECU LH
REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY
REMOVE REAR SEAT COVER CAP LH
REMOVE REAR SEAT LOCK BASE LH
REMOVE REAR SEATBACK SPRING ASSEMBLY LH
Remove the nut and detach the seatback cover bracket.
Disconnect the connector.
Detach the 8 hooks and remove the 19 hog rings and rear seatback spring assembly LH (lumbar support adjuster assembly LH) from the rear seatback cover with pad LH.
| *1 | Seatback Cover Bracket | *2 | Hook |
REMOVE REAR SEAT SHOULDER BELT GUIDE RH
REMOVE REAR SEAT CLIMATE CONTROL ECU RH
REMOVE REAR SEAT COVER CAP RH
REMOVE REAR SEAT LOCK BASE RH
REMOVE REAR SEATBACK SPRING ASSEMBLY RH
Tech Tips
Use the same procedures described for the LH side.