CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart Click here.
PROCEDURE
INSTALL REAR SEAT WIRE LH
Attach the 11 wire harness clamps to install the rear seat wire LH.
Connect the 3 connectors.
INSTALL REAR SEATBACK CLIMATE CONTROL BLOWER LH
INSTALL REAR SEATBACK COVER WITH PAD LH
INSTALL REAR SEAT LOCK BASE LH
INSTALL REAR SEAT COVER CAP LH
INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY
INSTALL REAR SEAT CLIMATE CONTROL ECU LH
INSTALL POSITION CONTROL ECU ASSEMBLY
INSTALL REAR SEAT SHOULDER BELT GUIDE LH
INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY
Attach the 2 claws to install the rear No. 1 seat headrest adjuster sub-assembly LH with the 2 bolts.
Connect the 2 connectors and attach the wire harness clamp.
Tech Tips
Use the same procedure to install the rear No. 1 seat headrest adjuster sub-assembly on the other side.
INSTALL REAR SEAT HEADREST SUPPORT
INSTALL REAR SEAT HEADREST ASSEMBLY
INSTALL REAR SEAT WIRE RH
Tech Tips
Use the same procedures described for the LH side.
INSTALL REAR SEATBACK CLIMATE CONTROL BLOWER RH
INSTALL REAR SEATBACK COVER WITH PAD RH
INSTALL REAR SEAT LOCK BASE RH
INSTALL REAR SEAT COVER CAP RH
INSTALL REAR SEAT CLIMATE CONTROL ECU RH
INSTALL REAR SEAT SHOULDER BELT GUIDE RH
INSTALL REAR SEAT CLIMATE CONTROL BLOWER LH
INSTALL SEAT CLIMATE CONTROL CONTROLLER LH
INSTALL REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY LH
INSTALL REAR NO. 2 SEAT ADJUSTER ASSEMBLY
Connect the air duct to the vehicle body.
Install the rear No. 2 seat adjuster assembly with the 4 bolts and nut.
Note
Be careful not to damage the vehicle body.
| *1 | Protruding Part |
Connect the anchor part of the rear center seat outer belt with the nut.
Note
Do not allow the anchor part of the rear center seat outer belt to overlap the protruding part of the anchor bracket.
INSTALL REAR SEAT CLIMATE CONTROL BLOWER RH
INSTALL SEAT CLIMATE CONTROL CONTROLLER RH
INSTALL REAR SEAT BELT INNER ANCHOR BRACKET ASSEMBLY RH
INSTALL REAR NO. 1 SEAT ADJUSTER ASSEMBLY
Connect the air duct to the vehicle body.
Install the rear No. 1 seat adjuster assembly with the 4 bolts and nut.
Note
Be careful not to damage the vehicle body.
INSTALL REAR SEATBACK ASSEMBLY RH
INSTALL REAR SEATBACK ASSEMBLY LH
INSTALL REAR SEAT CUSHION ASSEMBLY RH
INSTALL REAR SEAT CUSHION ASSEMBLY LH
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL COWL TOP VENTILATOR LOUVER RH
CHECK SRS WARNING LIGHT
CHECK REAR SEAT ASSEMBLY
Check the power seat operation:
Check the climate control seat system:
Check the seat vibration system: