SEAT VIBRATOR MODULE ASSEMBLY(for Ottoman) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

2. REMOVE COWL TOP VENTILATOR LOUVER

   Click here

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

   Click here

5. REMOVE ROPE HOOK

   Click here

6. REMOVE ROPE HOOK ASSEMBLY

   Click here

7. REMOVE DECK TRIM SIDE BOARD RH

   Click here

8. REMOVE DECK TRIM SIDE BOARD LH

   Click here

9. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

10. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler)

    Click here

11. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler)

    Click here

12. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

13. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

14. REMOVE TOOL BOX (w/o Spare Tire)

    Click here

15. REMOVE REAR FLOOR FINISH PLATE

    Click here

16. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

    Click here

17. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

    Click here

18. REMOVE SEAT VIBRATOR MODULE ASSEMBLY

    
    

    1. 

       Disconnect the air hose connector.

    2. 

       Disconnect the connector.

    3. Remove the 2 bolts and detach the claw. Then remove the module.