LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Front Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Lumbar Support)


    1. Attach the 2 claws to install the lumbar support adjuster assembly LH.

    2. Rotate the snap in the direction indicated by the arrow in the illustration to attach the snap to the lumbar support adjuster assembly LH.

      Tech Tips

      Use the same procedure to attach the snap on the other side.

      A001C0Q
    3. A001CDC

      Install the 4 bolts.

  2. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (w/o Lumbar Support)


    1. Attach the 2 claws to install the lumbar support adjuster assembly RH.

    2. Rotate the snap in the direction indicated by the arrow in the illustration to attach the snap to the lumbar support adjuster assembly RH.

      Tech Tips

      Use the same procedure to attach the snap on the other side.

      A001BCE
    3. A001FG9

      Install the 2 bolts.

  3. INSTALL FRONT SEATBACK FRAME ASSEMBLY LH

    Click here

  4. INSTALL FRONT SEATBACK COVER WITH PAD

    Click here

  5. INSTALL POWER SEAT SWITCH ASSEMBLY (w/ Shoulder Switch)

    Click here

  6. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  7. INSTALL FRONT SEAT HEADREST ASSEMBLY

    Click here

  8. INSTALL FRONT SEAT CUSHION ASSEMBLY LH

    Click here

  9. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  10. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  11. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  12. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD LH (for Driver Side)

    Click here

  13. INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD RH (for Front Passenger Side)

    Click here

  14. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  15. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  17. CHECK SRS WARNING LIGHT

    Click here

  18. CHECK FRONT SEAT ASSEMBLY


    1. Check the power seat operation:

      Click here

    2. Check the climate control seat system:

      Click here