CLOCK INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL CLOCK ASSEMBLY

    A001B4N

    1. Attach the 2 claws to install the clock assembly to the instrument cluster finish panel garnish assembly.

    2. Connect the connector.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  3. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  4. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  5. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  6. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  8. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  9. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  10. INSTALL NO. 3 BOX PANEL

    Click here

  11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  12. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  13. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  15. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here