COMBINATION METER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL COMBINATION METER ASSEMBLY


    1. A00198Z

      Connect the connector and attach the 2 claws to close the connector cover.

    2. Install the combination meter assembly with the 4 screws.

  2. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)

    Click here

  3. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera)

    Click here

  4. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. Connect the 2 connectors.

    2. A001COB

      Attach the 6 clips to install the No. 2 instrument cluster finish panel sub-assembly.

    3. Install the 2 clips.

  5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  6. INSTALL INSTRUMENT PANEL ORNAMENT

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  8. ENABLE AUTOAWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. INSTALL COWL TOP VENTILATOR LOUVER

    Click here