CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
INSTALL REAR DOOR OUTSIDE HANDLE ASSEMBLY LH
INSTALL REAR DOOR OUTSIDE HANDLE COVER LH
INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH
INSTALL REAR DOOR QUARTER WINDOW GLASS LH
INSTALL REAR DOOR GLASS RUN LH
INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH
INSTALL REAR DOOR DIVISION BAR BRACKET LOWER LH
INSTALL REAR DOOR SERVICE HOLE COVER LH
INSTALL REAR INNER DOOR GLASS WEATHERSTRIP LH
INSTALL SIDE TRIM BOARD COVER REAR LH (w/ Rear Door Sunshade)
INSTALL NO. 1 AUTO CURTAIN RAIL BRACKET LH (w/ Rear Door Sunshade)
INSTALL REAR CURTAIN SUB-ASSEMBLY LH (w/ Rear Door Sunshade)
INSTALL REAR DOOR NO. 2 FRAME GARNISH LH
INSTALL REAR DOOR FRAME GARNISH LH
INSTALL REAR DOOR TRIM COVER LH
INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
w/o Rear Door Sunshade:
w/ Rear Door Sunshade:
INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL COWL TOP VENTILATOR LOUVER RH