CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
PRECAUTION
Note
After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
REMOVE COWL TOP VENTILATOR LOUVER RH
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH
REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
w/o Rear Door Sunshade:
w/ Rear Door Sunshade:
REMOVE REAR DOOR TRIM COVER LH
REMOVE REAR DOOR FRAME GARNISH LH
REMOVE REAR DOOR NO. 2 FRAME GARNISH LH
REMOVE REAR LH CURTAIN SUB-ASSEMBLY (w/ Rear Door Sunshade)
REMOVE NO. 1 AUTO CURTAIN RAIL BRACKET LH (w/ Rear Door Sunshade)
REMOVE SIDE TRIM BOARD COVER REAR LH (w/ Rear Door Sunshade)
REMOVE REAR INNER DOOR GLASS WEATHERSTRIP LH
REMOVE REAR DOOR SERVICE HOLE COVER LH
REMOVE REAR DOOR DIVISION BAR BRACKET LOWER LH
REMOVE REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH
REMOVE REAR DOOR GLASS RUN LH
REMOVE REAR DOOR QUARTER WINDOW GLASS LH
REMOVE REAR DOOR GLASS SUB-ASSEMBLY LH
REMOVE REAR DOOR OUTSIDE HANDLE COVER LH
REMOVE REAR DOOR OUTSIDE HANDLE ASSEMBLY LH