REAR DOOR LOCK INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR DOOR INSIDE LOCKING CABLE ASSEMBLY LH

   Click here

2. INSTALL REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY LH

   Click here

3. INSTALL REAR DOOR LOCK ASSEMBLY LH

   
   

   1. 

      Apply adhesive to the threads of the 5 screws.

   2. Install the rear door lock assembly LH.

   3. Using a T30 'TORX' wrench, install the door lock with the 3 screws labeled A and 2 screws labeled B.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   4. Attach the 2 clamps and connect the 2 connectors.

4. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH

   Click here

5. INSTALL REAR DOOR QUARTER WINDOW GLASS LH

   Click here

6. INSTALL REAR DOOR GLASS RUN LH

   Click here

7. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH

   Click here

8. INSTALL REAR DOOR DIVISION BAR BRACKET LOWER LH

   Click here

9. INSTALL REAR DOOR SERVICE HOLE COVER LH

   Click here

10. INSTALL REAR INNER DOOR GLASS WEATHERSTRIP LH

    Click here

11. INSTALL SIDE TRIM BOARD COVER REAR LH (w/ Rear Door Sunshade)

    Click here

12. INSTALL NO. 1 AUTO CURTAIN RAIL BRACKET LH (w/ Rear Door Sunshade)

    Click here

13. INSTALL REAR CURTAIN SUB-ASSEMBLY LH (w/ Rear Door Sunshade)

    Click here

14. INSTALL REAR DOOR NO. 2 FRAME GARNISH LH

    Click here

15. INSTALL REAR DOOR FRAME GARNISH LH

    Click here

16. INSTALL REAR DOOR TRIM COVER LH

    Click here

17. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    w/o Rear Door Sunshade:

    Click here

    w/ Rear Door Sunshade

    Click here

18. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    Click here

19. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

21. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here