WASHER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL LEVEL WARNING SWITCH ASSEMBLY


    1. A0019QO

      Install the level warning switch assembly.

  2. INSTALL HEADLIGHT CLEANER CONTROL RELAY


    1. A001B1V

      Attach the claw to install the headlight cleaner control relay.

  3. INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. A001A1I

      Install the headlight cleaner motor and pump together with the hose.

  4. INSTALL WINDSHIELD WASHER JAR ASSEMBLY AND PUMP


    1. Attach the guide to install the windshield washer jar and pump with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      A0019VC

    2. Connect the 3 connectors and attach the 4 clamps.

  5. INSTALL WASHER INLET SUB-ASSEMBLY


    1. A001ETT

      Install the washer inlet with the bolt.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  6. INSTALL HEADLIGHT ASSEMBLY LH


    1. for HID Headlight assembly:

      Click here

    2. for HID Headlight assembly:

      Click here

  7. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A001FVV

      Install the windshield washer motor and pump assembly.

    2. Connect the connector.

  8. FILL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID


    1. A0019A6

      Connect the washer hose to the windshield washer motor and pump, and fill the washer jar with washer fluid.

  9. INSTALL FRONT FENDER LINER RH

    Click here

  10. INSTALL FRONT FENDER WHEEL OPENING MOULDING LH

    Click here

  11. INSTALL FRONT FENDER MAIN SEAL LH

    Click here

  12. INSTALL FRONT WHEEL LH

    Torque:
    140 N*m  { 1428 kgf*cm, 103 ft.*lbf }

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  14. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here