TURN SIGNAL FLASHER ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TURN SIGNAL FLASHER ASSEMBLY


    1. Connect the connector.

    2. Attach the clamp to install the turn signal flasher assembly.

  2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here,

  4. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here

  5. CHECK SRS WARNING LIGHT

    Click here