SEAT BELT CONTROL ECU INSTALLATION

PROCEDURE

1. INSTALL SEAT BELT CONTROL ECU

   
   

   1. Install the seat belt control ECU with the 2 nuts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Connect the 2 connectors.

2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

   Click here

3. INSTALL REAR FLOOR FINISH PLATE

   Click here

4. INSTALL TOOL BOX (w/o Spare Tire)

   Click here

5. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

6. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

7. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler)

   Click here

8. INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (w/o Rear Cooler)

   Click here

9. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

10. INSTALL DECK TRIM SIDE BOARD RH

    Click here

11. INSTALL DECK TRIM SIDE BOARD LH

    Click here

12. INSTALL ROPE HOOK

    Click here

13. INSTALL ROPE HOOK ASSEMBLY

    Click here

14. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    Click here

15. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    Click here

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

17. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here

18. CHECK SRS WARNING LIGHT

    Click here