CLEARANCE WARNING BUZZER(for Rear Side) INSTALLATION

PROCEDURE

1. INSTALL NO. 2 CLEARANCE WARNING BUZZER

   
   

   1. Attach the clamp to install the No. 2 clearance warning buzzer.

   2. Connect the connector.

2. INSTALL REAR SEAT OUTER BELT ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSTALL COWL TOP VENTILATOR LOUVER RH

   Click here

5. CHECK SRS WARNING LIGHT

   Click here