CLEARANCE WARNING BUZZER(for Front Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 1 CLEARANCE WARNING BUZZER


    1. Connect the connector.

    2. Attach the clamp and install the No. 1 clearance warning buzzer.

  2. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here