CLEARANCE WARNING ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL CLEARANCE WARNING ECU ASSEMBLY


    1. for LHD:


      1. Attach the guide to install the clearance warning ECU assembly.

        Note


        • Avoid any impact to the clearance warning ECU assembly.

        • Do not drop the ECU. If it is dropped, replace it with a new one.

      2. Install the nut.

      3. Install the ECU integration bracket with the nut and bolt.

      4. Connect each connector.

    2. for RHD:


      1. Install the clearance warning ECU assembly with the nut.

        Note


        • Avoid any impact to the clearance warning ECU assembly.

        • Do not drop the ECU. If it is dropped, replace it with a new one.

      2. Install the ECU integration bracket with the nut and bolt.

      3. Connect each connector.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

    Click here

  4. INSTALL LOWER INSTRUMENT PANEL

    Click here

  5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. INSTALL INSTRUMENT SIDE PANEL LH (for RHD)

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL RH (for LHD)

    Click here

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH (for RHD)

    Click here

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  11. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here

  12. CHECK SRS WARNING LIGHT

    Click here