NAVIGATION ANTENNA REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    CAUTION:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  5. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

    Click here

  6. REMOVE DEFROSTER NOZZLE ASSEMBLY

    Click here

  7. REMOVE NO. 3 HEATER TO REGISTER DUCT

    Click here

  8. REMOVE NAVIGATION ANTENNA ASSEMBLY

    A001ADE

    1. Detach the 4 clamps.

    2. Remove the 2 screws and navigation antenna assembly.