MULTI-DISPLAY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    CAUTION:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  7. REMOVE NO. 3 BOX PANEL

    Click here

  8. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  9. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  11. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  12. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  13. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  14. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here

  15. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  16. REMOVE ACCESSORY METER ASSEMBLY

    A001BHR

    1. Remove the 4 bolts.

    2. A001BDY

      Move the accessory meter assembly in the direction of the arrow in the illustration.

    3. Disconnect all the connectors and detach the clamp.

    4. Remove the accessory meter assembly.

  17. REMOVE NO. 1 COMBINATION METER BRACKET

    A001FPD

    1. Remove the 2 bolts and accessory meter bracket.