RADIO ANTENNA CORD REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   CAUTION:

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

2. REMOVE COWL TOP VENTILATOR LOUVER RH

   Click here

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

   Click here

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

   Click here

6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

7. REMOVE NO. 3 BOX PANEL

   Click here

8. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

   Click here

9. REMOVE UPPER INSTRUMENT CLUSTER FINISH PANEL

   Click here

10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

11. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

12. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

13. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

14. REMOVE ANTENNA CORD SUB-ASSEMBLY

    
    

    1. Disconnect each connector.

    2. Detach the clamp and remove the antenna cord sub-assembly.

       

15. REMOVE FRONT CONSOLE BOX ASSEMBLY

    
    

    1. w/o Rear Entertainment System:

       Click here

    2. for 5-Passenger with Ottoman:

       Click here

    3. w/ Disc Player:

       Click here

16. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

17. REMOVE REAR SEAT ASSEMBLY

    
    

    1. for Power Seat:

       Click here

    2. for 4-Passenger with Ottoman:

       Click here

    3. for 5-Passenger with Ottoman:

       Click here

    4. for Fixed Seat:

       Click here

18. REMOVE INNER ROOF SIDE GARNISH RH

    Click here

19. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

    
    

    1. for Standard Body:

       

       
       

       1. Disconnect each connector.

       2. Remove the 2 bolts.

       3. Detach the 12 clamps and remove the No. 2 antenna cord sub-assembly.

    2. for Long Body:

       

       
       

       1. Disconnect each connector.

       2. Remove the 2 bolts.

       3. Detach the 13 clamps and remove the No. 2 antenna cord sub-assembly.

20. REMOVE ROOF HEADLINING ASSEMBLY

    
    

    1. for Standard Body:

       Click here

    2. for Long Body:

       Click here

21. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY

    
    

    1. Disconnect each connector.

       

       Text in Illustration

       *a

       w/ Digital Audio Broadcasting

       -

       -

    2. Detach the 6 clamps and remove the No. 3 antenna cord sub-assembly.