REAR PACKAGE TRAY SPEAKER REMOVAL

PROCEDURE

1. PRECAUTION

   CAUTION:

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

2. REMOVE COWL TOP VENTILATOR LOUVER RH

   Click here

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. REMOVE REAR SEAT ASSEMBLY

   
   

   1. for Power Seat:

      Click here

   2. for Ottoman Seat:

      Click here

   3. for Fixed Seat Type:

      Click here

5. REMOVE REAR DOOR SCUFF PLATE LH

   
   

   1. for Standard Body:

      Click here

   2. for Long Body:

      Click here

6. REMOVE REAR DOOR SCUFF PLATE RH

   
   

   1. for Standard Body:

      Click here

   2. for Long Body:

      Click here

7. REMOVE REAR SEAT SIDE GARNISH LH

   Click here

8. REMOVE REAR SEAT SIDE GARNISH RH

   Click here

9. REMOVE INNER ROOF SIDE GARNISH LH

   Click here

10. REMOVE INNER ROOF SIDE GARNISH RH

    Click here

11. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

12. REMOVE STEREO COMPONENT SPEAKER ASSEMBLY

    Note

    Do not touch the cone part of the speaker.

    
    

    1. Disconnect the connector.

    2. Remove the 4 bolts and stereo component speaker assembly.

       

       Text in Illustration

       *A

       for Standard

       *B

       for 19 Speakers