STEERING PAD SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    CAUTION:

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE LOWER NO. 3 STEERING WHEEL COVER

    Click here

  5. REMOVE LOWER NO. 2 STEERING WHEEL COVER

    Click here

  6. REMOVE STEERING PAD

    Click here

  7. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. Disconnect each connector.

    2. A0019XH

      Detach the clamp and 3 claws.

    3. A00194M

      Remove the 4 screws.

    4. Detach the 6 pins and remove the steering pad switch assembly.