RADIO RECEIVER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 3 bolts.

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 bolts.

  3. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. Connect the connectors.

    2. Insert the multi-media module receiver assembly with bracket.

      Note

      When inserting the radio receiver, do not press the knobs on it.

    3. A001CCX

      Attach the 6 clips.

    4. Install the multi-media module receiver assembly with bracket with the 2 bolts.

  4. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  5. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  7. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  8. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  9. INSTALL NO. 3 BOX PANEL

    Click here

  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  12. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  14. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here