POWER STEERING ECU REMOVAL

PROCEDURE


  1. REMOVE ENGINE ROOM SIDE COVER

    Click here

  2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY

    Click here

  3. REMOVE COWL TOP VENTILATOR LOUVER

    Click here

  4. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. REMOVE POWER STEERING ECU

    A001AWRE01

    1. Release the locks of the 2 power steering ECU connectors A and B and disconnect the connectors.

    2. Disconnect the connector C from the power steering ECU.

    3. A0018WG

      Remove the 4 bolts and detach the claw, and remove the power steering ECU.