HEATED STEERING WHEEL CONTROLLER INSTALLATION

PROCEDURE

1. INSTALL STEERING WHEEL HEATER CONTROL ASSEMBLY

   
   

   1. Install the heater control assembly with the 2 screws and connect the connector clamp.

2. INSTALL STEERING WHEEL BOSS COVER LOWER

   Click here

3. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY

   Click here

4. INSTALL STEERING PAD SWITCH ASSEMBLY

   Click here

5. INSTALL STEERING WHEEL ASSEMBLY

   Click here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. INSTALL COWL TOP VENTILATOR LOUVER

   Click here

8. CHECK SRS WARNING LIGHT

   Click here

9. PERFORM INITIALIZATION

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.