STEERING WHEEL INSTALLATION

PROCEDURE

1. INSTALL STEERING WHEEL ASSEMBLY

   
   

   1. Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

   2. Connect the connectors.

   3. Install the steering wheel assembly set nut.

      Torque:

      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

2. INSTALL STEERING PAD ASSEMBLY

   Click here

3. INSPECT STEERING PAD

   Click here

4. INSPECT STEERING WHEEL CENTER POINT

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

6. INSTALL COWL TOP VENTILATOR LOUVER

   Click here

7. CHECK SRS WARNING LIGHT

   Click here

8. PERFORM INITIALIZATION

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.