ELECTRIC PARKING BRAKE SWITCH REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE COWL TOP VENTILATOR LOUVER

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

   Note

   
   

   • After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

   • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. REMOVE INSTRUMENT SIDE PANEL LH (for LHD)

   Click here

4. REMOVE INSTRUMENT SIDE PANEL RH (for RHD)

5. REMOVE INSTRUMENT PANEL ORNAMENT

   Click here

6. REMOVE SWITCH BASE HOLE COVER

   
   

   1. 

      Detach the claw and remove the cover from the No. 1 instrument panel safety pad.

      Tech Tips

      Tape the screwdriver tip before use.

7. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

8. REMOVE ELECTRIC PARKING BRAKE SWITCH ASSEMBLY

   
   

   1. Disconnect the connector.

   2. 

      Remove the 3 screws and bracket from the No. 1 instrument panel safety pad.

   3. Remove the switch from the No. 1 instrument panel safety pad.