TIRE PRESSURE WARNING INITIATOR DRIVER(for RHD) INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE MONITOR INITIATOR DRIVER

   
   

   1. Install the tire pressure monitor initiator driver with the 2 nuts.

      Torque:

      6.5 N*m  { 66 kgf*cm, 58 in.*lbf }

   2. Install the tire pressure monitor initiator driver with the bolt and nut.

   3. Connect the connectors.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here