TIRE PRESSURE WARNING RECEIVER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RHD and LHD models.

  • The procedure listed below is for the LHD model.

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. Install the tire pressure warning ECU and receiver with the bolt.

      Torque:
      for Black Bolt
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      for Silver Bolt
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      Note

      The torque value differs depending on whether the bolt is silver or black.

    2. Connect the connector.

  2. INSTALL TELEMATICS TRANSCEIVER

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REGISTRATION OF TRANSMITTER ID

    Click here

  5. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  6. PERFORM INITIALIZATION

    Click here