CAMSHAFT OIL CONTROL VALVE INSTALLATION

PROCEDURE


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)


    1. Apply a light coat of engine oil to a new O-ring, and install it to the camshaft timing oil control valve assembly.

    2. A001912

      Install the camshaft timing oil control valve assembly with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with cylinder head cover sub-assembly).

      • Be careful that the O-ring is not cracked or jumped when installing the camshaft timing oil control valve assembly.

    3. Connect the camshaft timing oil control valve assembly connector.

  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)


    1. Apply a light coat of engine oil to a new O-ring, and install it to the camshaft timing oil control valve assembly.

    2. A001AV3

      Install the camshaft timing oil control valve assembly with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note


      • Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with cylinder head cover sub-assembly).

      • Be careful that the O-ring is not cracked or jumped when installing the camshaft timing oil control valve assembly.

    3. Connect the camshaft timing oil control valve assembly connector.

  3. INSTALL NO. 1 AIR CLEANER INLET

    Click here

  4. INSTALL AIR CLEANER INLET COVER

    Click here

  5. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here

  8. DRIVING TEST


    1. After the engine is warmed up, perform the driving test. Then check that the camshaft timing oil control valve assembly operates normally.