CAMSHAFT OIL CONTROL VALVE REMOVAL

PROCEDURE


  1. REMOVE COWL TOP VENTILATOR LOUVER RH

    Click here

  2. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER INLET COVER

    Click here

  6. REMOVE NO. 1 AIR CLEANER INLET

    Click here

  7. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)

    A001912

    1. Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and camshaft timing oil control valve assembly.

    3. Remove the O-ring from the camshaft timing oil control valve assembly.

  8. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)

    A001AV3

    1. Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and camshaft timing oil control valve assembly.

    3. Remove the O-ring from the camshaft timing oil control valve assembly.