CRUISE CONTROL MAIN SWITCH INSTALLATION

PROCEDURE

1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY

   
   

   1. 

      Connect the connector and install the cruise control main switch assembly.

   2. Install the 2 screws.

2. INSTALL STEERING PAD

   Click here

3. INSTALL LOWER NO. 3 STEERING WHEEL COVER

   Click here

4. INSTALL LOWER NO. 2 STEERING WHEEL COVER

   Click here

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

6. INSTALL COWL TOP VENTILATOR LOUVER RH

   Click here

7. CHECK SRS WARNING LIGHT

   Click here