ДАТЧИК СОСТАВА ТОПЛИВОВОЗДУШНОЙ СМЕСИ УСТАНОВКА

INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

1. 

   Text in Illustration

   *a	Fulcrum Length

   Using SST, install the air fuel ratio sensor to the front exhaust pipe assembly.

   SST

   09224-00010

   Torque:

   without SST

   44 N*m  { 449 kgf*cm, 32 ft.*lbf }

   with SST

   40 N*m  { 408 kgf*cm, 30 ft.*lbf }

   Tech Tips

   
   

   • Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). If using a torque wrench with a length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

   • Make sure SST and the wrench are connected in a straight line.

2. Connect the air fuel ratio sensor connector.