FUEL LID OPENER MOTOR ASSEMBLY(for Wagon) REMOVAL

PROCEDURE


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  3. REMOVE REAR SIDE SEATBACK ASSEMBLY RH

    Click here

  4. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  5. REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

    Click here

  6. REMOVE LOWER DECK TRIM SIDE BOARD LH (w/ Partition Board)

    Click here

  7. REMOVE LOWER DECK TRIM SIDE BOARD RH (w/ Partition Board)

    Click here

  8. REMOVE DECK BOARD ASSEMBLY

    Click here

  9. REMOVE DECK BOARD SUB-ASSEMBLY

    Click here

  10. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

  11. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY

    Click here

  12. REMOVE REAR DECK FLOOR BOX

    Click here

  13. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

  14. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

  15. REMOVE NO. 2 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

  16. REMOVE NO. 1 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

  17. REMOVE NO. 6 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

  18. REMOVE NO. 5 DECK SIDE TRIM COVER (w/o Deck Rail)

    Click here

  19. REMOVE ROPE HOOK ASSEMBLY (w/o Deck Rail)

    Click here

  20. REMOVE DECK FLOOR BOX LH

    Click here

  21. REMOVE DECK FLOOR BOX RH

    Click here

  22. REMOVE REAR FLOOR FINISH PLATE

    Click here

  23. REMOVE FRONT DECK FLOOR BOX

    Click here

  24. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  25. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  26. REMOVE BACK DOOR WEATHERSTRIP

    Click here

  27. REMOVE INNER ROOF SIDE GARNISH CAP LH

    Click here

  28. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  29. REMOVE FUEL LID WITH MOTOR LOCK ASSEMBLY


    1. A004OQK

      Disconnect the connector.

    2. Remove the 2 nuts and fuel lid with motor lock assembly.

  30. REMOVE FUEL FILLER OPENING LID LOCK RETAINER


    1. A004MNJ

      Detach the 2 claws and remove the fuel filler opening lid lock retainer.